Holtgreven Ohaus Defender Series Bench Scales - Manual (Page 34)

EN-32 7000 Series Indicators
CONTINUOUS
ACCEPT
INTERVAL
PrINt1
AUTO PRINT
3600
PrINt1
CONTENT
ON STABLE
NUMERIC ONLY
ON
ON
ON
LOAD ZERO
3.9.3 Auto Print
Set the automatic printing functionality.
OFF = disabled
ON STABLE = printing occurs each time the stability criteria are met.
INTERVAL = printing occurs at the defined time interval.
ACCEPT = in Checkweigh mode, printing occurs each time the display is within
the accept range and the stability criteria are met.
CONTINUOUS = printing occurs continuously.
When ON STABLE is selected, set the conditions for printing.
LOAD = Prints when the displayed load is stable.
LOAD ZERO = Prints when the displayed load or zero reading is stable.
When INTERVAL is selected, set the time interval using the numeric keypad.
Settings of 1 to 3600 seconds are available.
3.9.4 Print Content Sub-menu
Enter this sub-menu to define the content of the printed data.
Result
Set the status.
OFF = the displayed reading is not printed.
ON = the displayed reading is printed.
NUMERIC ONLY = only the numeric portion of the displayed reading is printed.
Gross
Set the status.
OFF = the gross weight is not printed.
ON = the gross weight is printed.
12.000 kg
Net
Set the status.
OFF = the net weight is not printed.
ON = the net weight is printed.
12.000 kg
(ON)
12.000
(NUMERIC ONLY)
10.000 kg NET
INtEr
1
A.PrINt
OFF
rESULt
OFF
CONtNt
RESULT
GrOSS
OFF
CONtNt
GROSS
NEt
OFF
CONtNt
NET
ON.StAb
LOAD