Hardy HI 6600 Series Modular Sensor System - Manual (Page 60)

HI 6600 Series Modular Sensor System User Guide
Page | 60
7) From the DISPLAY drop down, select the Long Inverse selection. This will allow us to write an integer value
into the non-float registers.
8) From the FUNCTION drop down list select Read/Write registers, or click button 23 to open the Write
multiple registers display.
9) Double click on the first register and the Enter Value box appears. Enter the new value you wish to write to
this register. Our example shows writing a value of “2”, which is the Tare command number.