Hardy HI 6600 Series Modular Sensor System - Manual (Page 12)

HI 6600 Series Modular Sensor System User Guide
Page | 12
Note: Connecting 2 or more load cells requires a summing card or Junction Box.
Non-linearity
 0.0015% of full scale
Common Mode Rejection
 110 dB at or below 60 Hz
Common Mode Voltage Range
 2.5 VDC maximum (with respect to earth ground)
Load Cell Excitation
 5 VDC +/- 1.15 VDC maximum
 Isolation from digital section 1000 VDC minimum
C2 Calibration Input
 Isolation from digital section 1000 VDC minimum
Load Sensor Cable Lengths per Weight Processing Module
 250 feet maximum of C2 authorized cable (Maximum of4 load sensors) with a Summing Card or IT
Junction box
DC Input Voltage Weight Processing Module (with 4x 350ohm load cells)
 1.72 Watts, 12-27 VDC, 71-118 mA
Maximum System Span Distance
 500 feet (150 meters) span from the first Weight Processor Module to the Hardy Gateway Module
Hardy Gateway Module (HI 6600)
Network Connectivity
 Ethernet TCP/IP
 Ethernet UDP
 Modbus-RTU over RS485
 Modbus TCP
 EtherNet/IP (EIP models only)
 Profibus-DP (PB models only)
USB Port: For Parameter Saving and Backup to PC
Display Port: For optional Front Panel Display
Scoreboard: Uses RS485 port to stream weight readings to a large display or data logger
DC Input Voltage Hardy Gateway Module (HGM)
 3.90 Watts, 12-24 VDC, 162-290 mA