Hardy HI 6600 Series Modular Sensor System - Manual (Page 13)

HI 6600 Series Modular Sensor System User Guide
Page | 13
Optional HI 6110 Front Panel Display
 Monochrome 480 x 272 LCD display with back light
 Five tactile keys for menu item selection
 Displays in either white on black or black on white
 IP66 rated when mounted on a smooth, rigid surface (minimum 16-gage) using the supplied gasket
 2 watts maximum
Environmental Requirements
Operating Temperature Range
 -10ºC to 60º C (14º to 140º F)
Temperature Coefficient
 Less than 0.005% of full scale per degree C for Cal-LO and Cal-HI reference points
Storage Temperature Range
 -40 to 85º C (-40º to 185º F)
Humidity Range
 0-90% (non-condensing)
Environmental
 Intended for Building-in, indoor use only at ambient temperatures between 10ºC to 60º C (14º to 140º F) with a
pollution degree of 2.
Approvals
 UL, CUL and CE
 Hazardous Area Class I, Division 2, Groups A,B,C,D, T4A (pending)
 Hazardous Area Class III, Division 2, Groups E, F, G, T4A (pending)
Network Certifications
 EtherNet/IP ODVA Conformance Tested, Level 3)
 Profibus-DP by Profibus.org (pending)
Features and Capabilities
Hardy Process Toolbox
The Hardy Process Toolbox is a set of productivity tools that support process weighing functions. Each tool in the Hardy
Process Toolbox saves time, increases accuracy, improves efficiency or reduces risk in process weighing applications.
The HI 6600 includes the Toolbox functions discussed below.
C2 ® and eCal™ Calibration
Traditional calibration uses certified test weights. C2® (or eCAL™ as it is called in China) Electronic Calibration allows
a scale to be calibrated without the need for test weights. A C2 or eCAL weighing system consists of up to four load cell
sensors per WPM, a junction box, interconnect cable, and an instrument with C2 capabilities (e.g., the HI 6600 series
instrument).