Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 62)

49 CHAPTER 4
Operating Procedures/Dispenser
Step 4. Click on “Operations”. When entering Opera-
tions for the first time after cycling the power off/
on, an Alert asking for a User Name and Pass-
word appears. (See Fig. 4-104)
FIG. 4-80 ENTERING USER NAME AND PASSWORD
Step 5. Enter the User Name and Password and click
OK. The Operation Page appears. (See Fig.4-
105)
NOTE: When you enter the user name and password for
your level of security, at the beginning of each
session, you won’t have to enter it again for the
session.
FIG. 4-81 OPERATION PAGE
Diagnostics - See The HI 3010 Technical Service
Manual, Chapter 7 -
System Integrity Check and
Fault Determination From the Web Browser
Monitoring the HI 3010
The monitoring page displays the Standby and run Displays.
This information is automatically updated every 3 seconds.
To update it more often press on the Refresh button in your
browser.
Step 1. Click on “Monitor”. The Monitor Page Appears.
(See Fig. 4-106)
FIG. 4-82 MONITORING THE INSTRUMENT
Step 2. Click on “Back” to return to the Operation page.
View and Clear Totalized Weight
This page provides the Totalized Weight for each ingredient
that has been selected. It reads the totalized weight for Ingre-
dient 1-12 from the last time the totalized ingredient weight
was cleared. The page also allows you to clear an ingredients
totalized weight.
Step 1. Click on “Totalizers”. The Totalizer page
appears. (See Fig. 4-107)
FIG. 4-83 OPERATION - TOTALIZERS PAGE
Step 2. Click on the Clear Totalizer Pull Down menu to
select an ingredient whose totalized weight you
want to clear. (See Fig. 4-108)