Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 42)

29 CHAPTER 3
Filler
NOTE: The ability to operate the instrument from a Web
Page will be available in future iterations of the
Web Site.
Operating in Manual Mode from the Front
Panel
The HI 3010 allows the user to perform some of the opera-
tions in manual mode. The following Filling Functions can
operate Manually:
• Tare Scale
• Discharge
• Refill
• Auxiliary Device (Output Relay)
• Fast Fill
• Slow Fill
Step 1. Press the Manual button. The Manual Mode dis-
play appears with the cursor in front of Tare
Scale. (See fig. 3-102)
FIG. 3-79 MANUAL MODE DISPLAY/SELECTING
TARE SCALE
Step 2. Press the Enter button. The Tare Mode display
appears. (See Fig. 3-103)
FIG. 3-80 TARE MODE DISPLAY
Step 3. Follow the instruction on the screen. To Tare the
scale press the Clr. (Clear) button. A display
appears momentarily that says Tare Complete.
Step 4. Press the Exit button to return to the Manual
Mode Display.
NOTE: Each one of the displays will have a little differ-
ent instructions.
Step 5. Press the down arrow until the cursor is in front
of Discharge
Step 6. Press the Enter button. The Discharge Mode dis-
play appears. (See Fig. 3-104)
FIG. 3-81 DISCHARGE MODE DISPLAY/STARTING
DISCHARGE
Step 7. Press the Start button. To stop the discharge you
will have to manually press the stop button. (See
Fig. 3-105)
FIG. 3-82 DISCHARGE MODE DISPLAY/STOPPING
DISCHARGE
Step 8. To select another function, press the up or down
button to move the cursor in front of the function
that you want to perform.
Step 9. Press Exit to return to the Manual Mode display.
Step 10. Press Exit to return to the Standby display.
Operating in Manual Mode from the Web
Browser
You currently cannot operate the instrument from the Web
Browser.