Elektron Monomachine - Manual (Page 62)

THE PATTERN SEQUENCER
54
• The paste pattern operation can be undone by holding the [FUNCTION] key and
then pressing the [STOP] key. A message saying “UNDO PATTERN” will be shown
in the display.
CLEAR PATTERN
It is also possible to completely clear a pattern of all its content.
1. Make sure you are not in GRID RECORDING mode. The LED should be
not be lit.
2. When you have chosen the pattern you wish to clear, press and hold [FUNCTION] and
then press [PLAY] to clear the pattern. The message “CLEAR PATTERN” will appear
• The clear pattern operation can be undone by performing the clear pattern opera-
tion one more time. The message “UNDO PATTERN” will be shown in the display.
• Pattern clear clears everything, except the kit association.
SUPER COPY
For track, pattern and machine copy operations the default copy behaviour can be replaced
by the super copy function.
1. Hold the [FUNCTION] and [REC] for around a second and the default message-box will
expand to a larger one including a selection box.
2. You can now release [FUNCTION] while holding [REC]. While still holding [REC], use
the [UP] and [DOWN] keys to manoeuvre the inverted selection box.
3. When [REC] is released the selected copy action will be performed.
4. Paste the data by pressing [FUNCTION] and [STOP]. If you chose to paste a copied
pattern, a window showing “PASTE PATTERN” will appear.