Elektron Monomachine - Manual (Page 28)

MONOMACHINE SYNTHESIS ARRANGEMENT
20
2. Use the arrow keys to move to the “SAVE” icon. Press [ENTER/YES] to open the KIT
SAVE menu.
3. The screen presents a list of the kits stored in memory. Use the [UP] and [DOWN] keys
to choose from the 128 kit slots. Press [ENTER/YES] to select the slot where you want
to save your kit.
4. The next window appearing will allow you to name the kit. Use the LEVEL knob or the
[UP] and [DOWN] keys to cycle through the letters. The [LEFT] and [RIGHT] keys move
the cursor backwards and forwards on the line.
5. Pressing the [FUNCTION] key gives access to the “high score” selection method, in
which you see all characters at the same time. Keep the [FUNCTION] key held while
navigating using the [ARROW] keys. Release the [FUNCTION] key, when you have
located the letter of your choice.
6. When the kit name is complete, press [ENTER/YES] to save it.
7. If you want to exit without saving the kit, press [EXIT/NO].
UNDO KIT
There is a special kit in the first position of the kit list named the “UNDO KIT”.
When you have made unsaved changes to a kit and a new one is loaded, the unsaved old
kit will be stored in the “UNDO KIT” position. When saving a kit over an occupied position in
the kit list, the overwritten kit will also be saved in the “UNDO KIT”.