Elektron Monomachine - Manual (Page 22)

QUICK START
14
In LIVE RECORDING mode, you can lock parameters by turning a knob while recording.
Parameters can be locked for any parameter and track. To lock parameters for a new track,
select that track with the [TRACK] button and repeat the steps above.
To remove a single lock in GRID RECORDING mode, press and hold the [TRIG] key and
click the knob connected to the parameter you wish to remove. You will see that the
inverted square around the parameter is removed. To remove all parameter locks for a trig,
hold the [TRIG] key and press [CLEAR]. The locks are also cleared when the note is
removed.