Elektron Monomachine - Manual (Page 34)

TRACK EFFECTS
26
TRACK EFFECTS
The track effects are independent effects systems, available to the six tracks as extensions
to the machine synthesis. This chapter is a reference to all the functions you will find on the
AMPLIFICATION, EFFECT and FILTER pages.
The stereo track effects are applied to the sound signal as described in the figure below:
LEVEL
This parameter is available from all DATA pages. You can always reach it with the dedi-
cated LEVEL knob.
LEV controls the overall audio level of the track. It is applied at the end of the audio signal
path of the track. The level is designed as a master level control that can not be parameter
locked or assigned as a destination for the LFO’s. If you want to change the volume of a
track, use the track volume parameter on the AMPLIFICATION page. See section “TRACK
VOLUME”, on page 28 for more information on this parameter.
AMPLIFICATION PAGE
In the Amplification page you find the controls for the amplifier envelope (AHDR), distortion,
volume, pan and portamento.
AMPLIFIER ENVELOPE
The amplifier envelope is trigged every time an AMP-trig is received. This normally hap-
pens when a key has been pressed on the keyboard or if the [TRIG] keys has been
pressed, or if notes have been played from the sequencer or received over MIDI. The
)&"%300.
%*45 &2
'*-5&3
%*45035*0/
".1-*'*$"5*0/
&/7&-01&
4".1-&3"5&
3&%6$5*0/
70-6.&
1"/
%&-": -&7&-