Elektron Analog Four - Manual (Page 67)

GLOBAL MENU
59
OS UPGRADE
This menu option is used when upgrading Analog Keys OS.
Press [YES/SAVE] to make Analog Keys start listening for incoming OS SysEx data.
For the transfer to be possible, the device sending the OS syx-file should be connected to either the MIDI IN or
USB port of Analog Keys. Cancel the waiting state by pressing [NO/RELOAD].
When receiving the OS a progress bar will be visible. Once the bar has been filled, the texts “ERASING FLASH”
and “WRITING FLASH” will appear. When successful the machine will automatically reboot.
• When performing the sending of the OS syx file, we recommend using our free SysEx utility C6. It
can be downloaded from the Elektron website.
• If Analog Keys is receiving the OS upgrade through the MIDI ports, use the Elektron TM-1 USB
MIDI interface for up to 10x transfer speeds.
FORMAT +DRIVE
Offers the possibility to erase all content of +Drive. When selecting this command, a prompt will appear asking if
the formatting procedure should be executed. Press [YES/SAVE] to proceed with the formatting.
VOICE ROUTING
The last position in the GLOBAL menu sets the routing of the four voices.
Activate/deactivate routing of any the four voices to the main output and to the FX track. Navigate using the
[ARROW] keys. Tick or untick box with the [YES/SAVE] key.