Doepfer Wheel Electronic User Manual
Page 15
User's Guide
Wheel Electronic V1.0
Page 15
Extent of delivery
The WE delivery contains the following parts:
• Wheel Electronic pc board, assembled and tested
• Power Supply (230V mains voltage, European type mains plug, output voltage range
7...12V, current min. 100 mA) included only for shipments within Germany, for shipments
outside Germany please contact your local representative or dealer
• This Wheel Electronic user's guide
• Four 3-pin cable sets (about 30 cm) for ST1…ST4
• One 2-pin cable sets (about 30 cm) for ST5
Elements that can be connected to WE (e.g. modulation or pitch wheels, rotary or slider/fader
potentiometers, foot controllers, foot switches, joy sticks and so on) are not included and have
to be purchased in addition. Suitable parts can be found on our website www.doepfer.com.
Please use the link accessories and spare parts of the product overview page. Prices can be
found in the price list.
Appendix: Connecting the modulation wheel box to Wheel Electronic
P
M
Pitch Bend
Modulation
GND
NC
+5V
Messeingang
measuring input
voltage range (JP2):
limited voltage range (+V)
adjust +V so that in the center position the
pitch bend data 40H (64 decimal) is sent
GND
+5V
NC
Messeingang
measuring input
Spannungsbereich (JP2):
voller Bereich (+5V)
voltage range (JP2):
full range (+5V)