Cub Cadet P Series - Manual (Page 79)

74 PK Series
TOOLS AND TORQUES
Table 1. Required Tools
Table 2. PK Pump Torque Values
Miscellaneous
P Series Service & Repair Manual
Torque Wrench
Scribe, Paint Pen, or Marker
Seal Hook with a Magnet
Flat Blade Screwdriver
Pliers
Internal Snap Ring
Allen Wrenches
5mm
1/8 inch
3/16 inch
1/4 inch
3/8-Inch Drive Ratchet and Sockets
7/16-inch Socket
1/2-inch Socket
9/16-inch Socket
5/8-inch Socket
11/16-inch Socket
10-mm Socket
Combination Wrenches
7/16 inch
1/2 inch
9/16 inch
5/8 inch
11/16 inch
7/8 inch
10 mm
Item # and/or Description
Case Drain (fitting torque)
System Port (fitting torque)
Inlet (fitting torque)
4, End Cap/Adapter Plate Bolts
10, Cap Screw
15, Bypass Valve
42A, 42B, Shock Valves/Check Plugs
44, System Charge Relief Kit (Aux Chg)
45, Aux Relief Valve Kit
56, Diagnostic Plug
66, Filter Cover Plug
67, Filter Cover
103, Screw 5/16 x .875
106, Bolt
Torque
200-250 lb-in (22.6-28.2 Nm)
370-470 lb-in (41.8-53.1 Nm)
200-250 lb-in (22.6-28.2 Nm)
180-220 lb-in (20.3-24.9 Nm)
180-220 lb-in (20.3-24.9 Nm)
110-130 lb-in (12.4-14.6 Nm)
180-240 lb-in (20.3-27.1 Nm)
180-240 lb-in (20.3-27.1 Nm)
180-240 lb-in (20.3-27.1 Nm)
84-120 lb-in (9.4-13.5 Nm)
55-85 lb-in (6.2-9.6 Nm)
200-275 lb-in (22.6-31.1 Nm)
200-240 lb-in (22.6-27.1 Nm)
180-220 lb-in (20.3-24.9 Nm)