Cub Cadet P Series - Manual (Page 115)

110 PW Series
TOOLS AND TORQUES
Table 1. Required Tools
Table 2. PW Pump Torque Values
Miscellaneous
P Series Service & Repair Manual
Torque Wrench
Scribe, Paint Pen, or Marker
Seal Hook with a Magnet
Flat Blade Screwdriver
Pliers
Internal Snap Ring
Allen Wrenches
5mm
3/16 inch
1/4 inch
3/8-Inch Drive Ratchet and Sockets
1/2-inch Socket
9/16-inch Socket
5/8-inch Socket
10-mm Socket
Combination Wrenches
1/2 inch
9/16 inch
5/8 inch
7/8 inch
10 mm
Item # and/or Description
Case Drain (fitting torque)
System Port (fitting torque)
Inlet (fitting torque)
Fan Nut, Hex Lock 3/8-24 UNF
42A, 42B, Shock Valves/Check Plugs
44, Charge Relief Kit
45, Aux Relief Valve Kit
49, Aux Bypass/Check Kit
50, Bypass Valve
56, Screw
58, Housing Bolt
66, Steel Plug
67, Filter Cover
Screw, Socket Hd.Control Arm 5/16-24 x .75
Screw, Socket Hd. RTN M8 x 1.25 x 25
Torque
370-470 lb-in (41.8-53.1 Nm)
370-470 lb-in (41.8-53.1 Nm)
370-470 lb-in (41.8-53.1 Nm)
180-220 lb-in (20.3-24.9 Nm)
180-240 lb-in (20.3-27.1 Nm)
180-240 lb-in (20.3-27.1 Nm)
180-240 lb-in (20.3-27.1 Nm)
180-240 lb-in (20.3-27.1 Nm)
84-120 lb-in (9.4-13.5 Nm)
180-220 lb-in (20.3-24.9 Nm)
255-345 lb-in (28.8-38.9 Nm)
55-85 lb-in (6.2-9.6 Nm)
200-275 lb-in (22.6-31.1 Nm)
200-240 lb-in (22.6-27.1 Nm)
180-220 lb-in (20.3-24.9 Nm)