Cub Cadet ZT-3400 - Manual (Page 41)

ZT-2800 ® /ZT-3100/ZT-3400™ 39
figure 36, screw tightening sequence diagram
Starting with the number “1” screw location,
tighten sequentially through to “16.”
Torque each screw to 105 - 155 lb-in
(11.87 - 17.52 Nm).
NOTE: As a general rule, use the low end of
the torque specification.
side COVer – sCrew TigHTening seQUenCe