Cub Cadet ZT-3400 - Manual (Page 20)

18 ZT-2800 ® /ZT-3100™/ZT-3400™
BraKe arM asseMBLY (Code 3)
Refer to Figure 13
disassembly
1. Mark the position of the brake arm (102) in
relation to the brake shaft (101).
NOTE: The orientation of the brake arm and
brake shaft to one another is very im-
portant.
2. Remove the retaining clip (103).
3. Remove the brake arm (102).
inspection
1. Inspect all parts for excessive wear or dam-
age. Replace if necessary.
2. Inspect the splines on the brake arm and
brake shaft.
assembly
1. Reassemble all parts in the reverse order
of disassembly.
figure 13, parking Brake
Character #7 in the model number code = 3
Example: ZX-XXXX-3XXX-XXXX
Brake Shaft (101)
Brake Arm (102)
Reference Mark
102
103
Brake Shaft (101)