COP-USA CD55-H-SDI - Manual (Page 5)

5
II. Functions Description
1.
Integrated speed-variable PAN/TILT
a. Turning 360 ° horizontally and continuously with unlimited positions and an
adjustable speed from 0 -- 300°/s ; turning 0 - 90°vertically with a speed up to 120°/s.
b. Running stably at low speed with super lower noise. Pictures have no shaking.
c. the location precision up to ±0.1°.
d. 6 programmable tracks, 4 scanning tracks,1 pattern track.
e. Idle ptorection and power-off memory function.
f. Display orientation,title of speed dome camera,temperature, alarm and other
informations
2. High Intelligent Degree
a. 255 preset positions can be preset with powerless memory;
b. The camera can scan horizontally between two points and scan speed can be
modified. The positions of linear scan are optional and the dome camera can
scan the range larger or smaller than 180° between any two points with
adjustable speed;
c. Automatic speed matching function
d. Built-in PELCO-D、PELCO-P protocol, baud rate from 2400bps to 19200bps
3. Functions of the Camera
a. Description of the Focus Control Mode: the user can adjust the focus of the
camera manually.
b. Description of Backlight Compensation: when the object to be shot is dark
and looks dim, the user can open the backlight compensation according to
actual need.
c. Description of White Balance: when the image has color distort on the screen,
the user can set different modes by orders. There are 6modes for options:
Indoor Mode Outdoor Mode Touch Mode Automatic Trace of
White Balance ATW Manual WB-MAN Automatic Mode.
d. Description of ZOOM Control: user can “pull near” or “push far” the lens
according to actual conditions
e. Electron shutter: it is 1/50 sec after the camera electrified, and it will display 50
on the monitor.
f. AE Mode: setup of Manual/Automatic.
g. Low illumination set: It is used only when the external brightness is extremely
low. Normally the camera works on the automatic state. In case the external
brightness is lower than 1Lux, the camera can be switch to the Zero
Illuminance state automatically and icon appears on the screen. You can
also set the Zero Illuminance state manually