COP-USA CD55-H-SDI - Manual (Page 17)

16
1.5.3.1 PATROL NO: to set the patrol number.
1.5.3.2 EDIT PATROL: to set the parameter of the patrol, after enter this item,
the monitor is as following:
Both top and bottom lines display prompt and information of each
patrol is displayed on the middle of the screen. Data of 2 Patrol
points appears on one line. And to press PAN LEFT/RIGHT to
move the cursor, to press TILT UP/DOWN to modify the data, to press
“CLOSE” to save and quit the edit state.
1.5.3.3 RUN PATROL: to run the patrol, press “CLOSE” to exit.
1.5.3.4 CLEAR PATROL: to clear the patrol.
1.5.3.5 RETURN: to return to the PROGRAM SETUP menu.
1.5.4 PATTERNS: to enter the PATTERN setting submenu.
1.5.4.1 PATTERNS: to edit the pattern number. No 1-3 for optional.
1.5.4.2 RECORD PATTERN: to record the pattern, and press
“CLOSE” to exit.
1.5.4.3 RUN PATTERN: to run the pattern, and will quit the menu
automatically, and any move of the joystick will stop this
function.
1.5.4.4 CLEAR PATTERN: to clear the setting of the pattern.
1.5.4.5 RETURN: to return to the superior menu.
1.5.5 CLEAR: to enter the CLEAR submenu.
1.5.5.1 CLEAR ALL PRELABEL: to clear all the preset positions.