COP-USA CD55-H-SDI - Manual (Page 13)

12
1.1.8 EXIT: to quit the main menu.
1.2 SYSTEM SETUP
1.2.1 SYSTEM INFORMATION: to display the system information.
1.2.2 AUTO FLIP: to ON/OFF the dome 180°auto flip.
1.2.3 PROP PAN SPD: to ON/OFF the p roportional pan function.
1.2.4 RESERVED：This function setting also kept for this products.
1.2.5 ALARM SETUP:
1.2.5.1 ALARM NO: N/A
1.2.5.2 ACTION: N/A
1.2.5.3 ALARM: N/A
1.2.5.4 RETURN: to return to the SYSTEM SETUP menu.
1.2.6 RETURN: to return to the main menu.
1.3 DISPLAY SETUP
1.3.1 CAMERA ID: when it is set at ON, address of dome camera
appears on the screen such as “CAM 001”. The default setting
is ON.
1.3.1.1 DISPLAY: to ON/OFF the dome address.
1.3.1.2 POSITION: to set the position of dome address, there are four
positions to be displayed: TOP-L (top-left corner), TOP-R
(top-right corner), BOTT-R (bottom-right corner) AND
BOTT-L (bottom-left corner).
1.3.1.3 RETURN: to return to the DISPLAY SETUP menu.
1.3.2 ANGLE DISPLAY: to enter the angel display submenu.
1.3.2.1 DISPLAY: to ON/OFF the angle display. ONEPUSH
singly displayed, auto disappeared in 4 seconds.
1.3.2.2 POSITION: to set the display position of the angle:
SYSTEM SETUP
1.SYSTEM INFORMATION
2.AUTO FLIP: ON
3.PROP PAN SPD: ON
4.RESERVED:
N/A
5.
6.RETURN
SYSTEM SETUP
1.SYSTEM INFORMATION
2.AUTO FLIP: ON
3.PROP PAN SPD: ON
4.RESERVED:
N/A
5.
6.RETURN