COP-USA CD55-H-SDI - Manual (Page 12)

11
V. Operation Introduction
1. Basic Operation of the Menu
1.1 Open the main menu of the setup by the keyboard or the matrix via the
operation “Call No. 64 preset position
1.2 When the menu is displayed on the screen, operate “TILT UP”, “TILT
DOWN” to move the cursor to the option to be set, operate “PAN LEFT”,
“PAN RIGHT” to modify the content or the order to enter this option.
1.3 All setups on the menu couldn’t be lost even power failure
2. Setup of the Menu
1.
1.1 MAIN MENU
1.1.1 SYSTEM SETUP.
1.1.2 DISPLAY SETUP: to enter the submenu of display of the screen by
which ID display, title display of preset point and display of
camera screen can be set.
1.1.3 CAMERA SETUP: to enter the submenu of setup of normal
data of camera.
1.1.4 MOTTON SETUP: to enter the setup of enhanced function of
dome camera.
1.1.5 PRIVACY MASK: to enter the submenu of the camera privacy function
setting.
1.1.6 ADVANCE SETUP.
1.1.7 SYSTEM RESET: to reset the system. The dome will make
self-checking function after it carries out reset function, the station for
the dome's reset is ： AUTO FLIP -ON/PTZ SPD RATE-ON/ ID
DISPLAY-ON/ANGLE DISPLAY-OFF/ DOME LABEL DISPLAY-OFF/
D-ZOOM-OFF/ PT INTERLOCK –AF AUTO/BLC-OFF/ AUTO HOME
–OFF/ PARK TIME -4MIN/FAN-AUTO/ TIMP DISPAY-OFF。
MAINMENU
1.
2.
3.
4.
5.
6.
7.SYSTEM RESET
8.EXIT