COP-USA CD55-H-SDI - Manual (Page 18)

17
1.5.5.2 CLEAR ALL SCAN: to clear all the scanning.
1.5.5.3 CLEAR ALL PATROLS: to clear all the patrols.
1.5.5.4 CLEAR ALL PATTERNS: to clear all the patterns.
1.5.5.5 RETURN: to return to the PREGRAM SETUP menu.
1.5.5.6 EDIT DOME LABEL: To edit the dome label. Set a label for each
dome, the label is make up of 10 characters, and the optional
character is the same as 2.5.1.2.
2.5.7 RETURN: to return to the MAIN MENU.
1.6 PRIVACY MASK:
1.6.1 PRIVACY MASK: to set the privacy number. 1-4 for optional.
(different cameras have different choose)
1.6.2 MASK SHADE: to set the color of the mask area.
1.6.3 DISPLAY: to ON/OFF the privacy function
1.6.4 EDIT MASK: to edit the mask area.
1.6.5 RETURN: to return to Main Menu.
1.7 ADVANCE SETUP:
1.7.1 HOME SETUP: to enter the auto home submenu.
1.7.1.1 AUTO HOME: to set ON to open the AUTO HOME function, it is
mean the dome camera will back to the home position without any
action in the PARK TIME. And set OFF to close this function.
1.7.1.2 HOME ACTION: to set the auto home point. For example:
if the user want to set one scene to be the HOME, just set
the dome camera to this scene, and set it to be the preset
No:3, then open this menu, set the HOME ACTION to be
“3”. And don’t forget to set the AUTO HOME to be ON.
The HOME ACTION could be the preset “1-50”, RESUME,
PATROL 1, SCAN 1, PATT 1. The “1-50” are the preset
number, RESUME is mean to back to the scene before