COP-USA CD55-H-SDI - Manual (Page 19)

18
the manual control, PATROL 1 is the patrol No.1, SCAN 1 is the
scanning No.1 and the PATT 1 is the pattern No.1.
1.7.1.3 PARK TIME: to set the park time of the dome camera, it is mean how
long the dome camera will be back to the HOME. The time from 1-99
minutes.
1.7.1.4 PWR RESUME: to ON/OFF the function, which the dome camera
will be back to the scene before the power off.
1.7.1.5 RETURN: to return to the ADVANCE SETUP Menu.
1.7.2 PASSWORD: to enter the password setting menu. (Initial
password is 111111.)
1.7.2.1 PASSWORD: to ON/OFF the password protection.
1.7.2.2 MODIFY KEY: to enter the new password.
1.7.2.3 CONFIRM KEY: to enter the new password again for
confirm.
1.7.2.4 RETURN: to return to the ADVANCE SETUP menu.
1.7.3 CAM ID SETUP: to enter the soft ID setting submenu.
1.7.3.1 CAMERA S/N: to display the series number of the dome.
1.7.3.2 INPUT S/N: to input the series number of the dome.
1.7.3.3 OLD ID: to display the old address of the dome.
2.7.3.4 NEW ID: to display the new address of the dome. Input
the series number before inputting the new address.
2.7.3.5 SAVE & RETURN: to save and return to the ADVANCE
SETUP menu.
2.7.3.6 CANCEL & RETURN: to cancel and return to the
ADVANCE SETTING menu.
2.7.4 FAN CONTROL: to enter the fan control setting submenu.
2.7.4.1 FAN: to set the work condition of the fan: ON / OFF /
AUTO.
2.7.4.2 OPEN TEMP: to set the work temperature of the fan