COP-USA CD55-H-SDI - Manual (Page 16)

15
characters at most, they are 0-9, A-Z, blank and special
characters including 〈 = 〉？，@\+、-./ ］etc. Notes: the
first letter must be from 0-9 or A-Z, in case that, it stands
for canceling the preset position topic. When testing the
preset position, it only display “NO.XXX”, not display the
topic.
1.5.1.3 CLR LABEL: to clear the preset label.
1.5.1.4 RETURN: to return to the PROGRAM SETUP submenu.
1.5.2 AUTO SCAN: to enter the Auto Scanning submenu:
1.5.2.1 SCAN NO: to set the auto scanning number, maximum
is 03.
1.5.2.2 SPEED: to set the scanning speed for each patrol.
1.5.2.3 SET START LIMIT: to set the start position of the
scanning. After the user enter this item, to use the
joystick to move the dome camera and press “CLOSE”
to save the current position.
1.5.2.4 SET END LIMIT: to set the end position of the scanning.
After the user enter this item, to use the joystick to
move the dome camera and press “CLOSE” to save the current
position.
1.5.2.5 RUN SCAN: to run the scanning function, Please set the start and
end position first. And if the start and end position are
the same. The dome camera will scanning for 360°。To
press “CLOSE” to exit.
1.5.2.6 CLEAR SCAN: the clear the setting of the scanning, to
press “CLOSE” to exit.
1.5.2.7 RETURN: to return to the PROGRAM SETUP menu.
1.5.3 PATROLS: to enter the submenu to set the patrols.