Checkline KXE - Manual (Page 2)

– 2 –
Important Operating Notes
To avoid damage, do not move the center roller by hand.
Tensions that exceed the tension range of the instrument by more
than 100% may cause permanent damage to the measuring spring
and must be avoided under any circumstances.
The device must not be operated in potentially explosive areas and
must not come into contact with aggressive substances
9.0 Memory Management .......................................................................................... 22
9.1 Clearing the KXE memory
9.2 Memory function HOLD
10.0 Error Messages ..................................................................................................... 23
11.0 PC Communications (RS-232 Interface) ........................................................... 24
11.1 TENSION INSPECT program
11.2 Windows Terminal Program
12.0 Specifications ......................................................................................................... 25
13.0 Pin Assignments .................................................................................................... 26
13.1 Interface Signals
13.2 Analog Cable
14.0 Warranty ............................................................................................................... 27
– 27 –
14.0 Warranty
The manufacturer warrants to the original purchaser that this product is of merchantable
quality and confirms in kind and quality with the descriptions and specifications thereof.
Product failure or malfunction arising out of any defect in workmanship or material in
the product existing at the time of delivery thereof which manifests itself within one
year from the sale of such product, shall be remedied by repair or replacement of such
product, at the manufacturer’s option, except where unauthorized repair, disassembly,
tampering, abuse or misapplication has taken place, as determined by the manufacturer.
All returns for warranty or non-warranty repairs and/or replacement must be authorized
by the manufacturer, in advance, with all repacking and shipping expenses to the
address below to be borne by the purchaser.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE
WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR
PURPOSE OR APPLICATION. ELECTROMATIC SHALL NOT BE RESPONSIBLE
NOR LIABLE FOR ANY CONSEQUENTIAL DAMAGE, OF ANY KIND OR
NATURE, RESULTING FROM THE USE OF SUPPLIED EQUIPMENT, WHETHER
SUCH DAMAGE OCCURS OR IS DISCOVERED BEFORE, UPON OR AFTER
REPLACEMENT OR REPAIR, AND WHETHER OR NOT SUCH DAMAGE IS
CAUSED BY MANUFACTURER’S OR SUPPLIER’S NEGLIGENCE WITHIN ONE
YEAR FROM INVOICE DATE.
Some State jurisdictions or States do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation may not apply to you. The duration
of any implied warranty, including, without limitation, fitness for any particular
purpose and merchantability with respect to this product, islimited to the duration of
the foregoing warranty. Some states do not allow limitations on how long an implied
warranty lasts but, not withstanding, this warranty, in the absence of such limitations,
shall extend for one year from the date of invoice.
Every precaution has been taken in the preparation of this manual. The manufacturer, assumes no responsibility for errors
or omissions. Neither is any liability assumed for damages resulting from the use of information contained herein. Any
brand or product names mentioned herein are used for identification purposes only, and are trademarks or registered
trademarks of their respective holders.