Checkline DTMX - Manual (Page 15)

6.11 Viewing Data In Standard Memory
To view data stored in Standard Memory, press the key.
The following will be displayed when the key is pressed repeatedly.
Each time the key is pressed the displayed value with change.
Press the key at any time to exit the Recall Mode.
6.12 To Clear All Data Stored In The Standard Memory
Press the key and the key simultaneously
6.20 Standard Memory with No Auto Power Off (Standard - NAPO)
This memory mode is identical to the Standard Memory Mode detailed above,
except that when configured in this mode the power will not turn off
automatically after 90 seconds of inactivity.
MAX
MIN
PEAK
Maximum Value
Last Reading
Minimum Value Peak Value
Action Display Will Show LCD Indicator
Press R ECALL key Maximum Value MAX
Press R ECALL key Minimum Value MIN
Press R ECALL key Peak Value PEAK
Press R ECALL key Last Reading none
RECALL
RECALL
POWER
EXIT
STORE RECALL
15
6.41 Viewing Data In Continuous Data Logging Mode
To view data stored in the Extended Memory press the key
The following will be displayed when the key is pressed repeatedly.
Each time the key is pressed the displayed value will change.
Press the key at any time to exit the Recall Mode.
6.42 To Clear All Data Stored In The Extended Memory.
Press the key and the key simultaneously.
18
Action Display Will Show LCD Indicator
Press R ECALL key Maximum Value MAX
Press R ECALL key Minimum Value MIN
Press R ECALL key Peak Value “ P ”
Press R ECALL key Average Value “ A ”
Press R ECALL key Standard Deviation “ d ”
Press R ECALL key Date Point #1 “ 1 ”
Press R ECALL key Data Point #2 “ 2 ”
● ● ●
● ● ●
● ● ●
Press R ECALL key Data Point #100 “ 100 ”
MAX
MIN
A
100 2 1
Maximum Value
Data Point 100 Data Point #2 Data Point #1
Minimum Value
PEAK
Peak Value Average Value Standard Deviation
RECALL
RECALL
POWER
EXIT
STORE RECALL