Checkline ETW - Manual (Page 5)

 Electromatic Equipment Co., Inc.
-16-
5.0 PCFE INSTRUCTIONS
5.1
Changing the Password
Only a vailable in the "Master Version" of the PC Front End.
1.
Click " Change Password" on the PCFE
2. Enter the "Current Password" ( "master" is the default password)
3. Enter New Password in "New Password Box"
4. Enter New Password in "Confirm Password Box" to Confirm.
The Default Password for access
to Master PCF E is "master ".
The Default Password for the
Distributor
PCFE is "distr"
Passwords must be changed by
Distributor / Calibration Vendor
prior to End User Usage.
5.2
Language
The PCFE languages available
include; English, French, German,
Italian, Polish, Portuguese, Spanish,
Russian and Chinese
 Electromatic Equipment Co., Inc.
-5-
Upload all: Displays all stored wrench measurement data in the the
PCFE data window (lower left)
Clear: Clears the wrench measurement data displayed on the PC.
Clear wrench data: Clears the wrench measurement data displayed on the
PCFE and in the wrench.
Unit conversion: Allows user to change the units of the displayed
measurement data on the PCFE.
Sort by preset: Sort the displayed measurement data and group according
to ascending preset numbers.
Save as an excel file: Save the current displayed measurement data as an excel
file.
The PCFE measurement data window displays stored wrench measurements
showing wrench memory location, date and time, torque value.