Cannon Instrument CAV-2000 User Manual

Page 13

CANNON

Automatic Viscometer Models CAV-2100 and CAV-2200 with VISCPRO

Instruction & Operation Manual

Version 2g — May, 2009; CANNON

Instrument Company

2139 High Tech Road • State College, PA 16803 • USA

is a Sample Input window that describes your CANNON

instrument and

provides controls for running tests. The second is an Analysis window
that presents data from CAV tests.

The Sample Input window (note networked instrument tubes on tube tabs)

NOTE

If the Sample Input window does not appear when the software loads, click
View Instrument from the Main menu, then click the desired instrument
group (type of instrument, e.g. CAV, CCS, PolyVISC) from the list of
available instruments and click OK. If the Available Instruments list box is
blank, your CAV instrument may not be on-line. Check cable connections
and make certain the control panel red power switch is ON. (Turn the
switch clockwise for ON. Push the switch in when turning the unit OFF.)

The Sample Analysis Table window displays report data based on user-configurable
parameters.