BUCHI Rotavapo R-100 - Manual (Page 45)

BÜCHI Labortechnik AG Help with faults | 8
Operation Manual Rotavapor® R­100 45/60
8.2.2 Replacing the fuse
The fuse is on the rear of the heating bath.
u Allow the heating bath to cool down.
u Disconnect the power cord.
u Open the fuse holder (1) with a large screwdriver.
u Replace the blown fuse with an intact one of the same rating.
u Screw the fuse holder (1) back in.
u Reconnect the power cord.