Brookfield CAP2000 Viscometer - Manual (Page 4)

Brookfield Engineering Labs., Inc. Page 4 Manual No. M/94-310F
The following optional items may have been included:
Part No.
8. CAPCALC Software and PC Cable (CAP 2000): DOS .... CAP-114Y
Windows .... CAP-225Y
9. Printer (CAP 1000 and 2000) .... PRINTER 115/PRINTER 230
10. Viscosity Standard Fluid for calibration .... See Table A1 in Appendix A
Please check to be sure that you have received all components, and that there is no damage. If you
are missing any parts, please notify Brookfield Engineering or your local Brookfield dealer immedi-
ately. Any shipping damage must be reported to the carrier. Save the packing container, if possible,
for future use when returning the viscometer to Brookfield or an authorized dealer for service.
I.2 Utilities
Voltage and frequency requirements for the CAP viscometer are indicated on the label on the
back side of the instrument base. Check to make sure these agree with the power supply
available in your laboratory. This information can be found on the name plate.
I.3 Specifications
Speeds: CAP 1000 750 RPM at 50 Hz
900 RPM at 60 Hz
CAP 2000 50 - 2000 RPM (50 Hz or 60 Hz as dedicated;
check name plate on the viscometer)
1.0 RPM increments
Temperatures: CAP 1000L 5
°
C to 75
°
C CAP 2000L 5
°
C to 75
°
C
CAP 1000H 50
°
C to 200
°
C CAP 2000H 50
°
C to 200
°
C
All models provide 0.1
°
C increments
Weight: Gross Weight 46 lb 21 kg
Net Weight 39 lb 17.7 kg
Carton Volume 4.7 cu ft 0.13 m 3
Carton Dimensions 25.5 in. L x 17.5 in. W x 18.25 in. H
65 cm. L x 44.5 cm. W x 46.4 cm. H
Materials: CAP cone spindles and temperature plates are made of tungsten carbide.
Operating CAP 1000 and 2000 Viscometers must be operated within the following
Environment: ambient temperatures:
-5
°
C (4
°
F) to 40
°
C (149
°
F)
I.4 Set-Up
Note: DO NOT lift the viscometer by the handle or display panel! LIFT by the base
console or column!