Physical layer data format – Aviom A-16R/A-16CS User Manual
Page 80
71
A-16R P
eRsonAl
M
ixeR
And
A-16Cs C
ontRol
s
uRfACe
u
seR
G
uide
Physical Layer Data Format
The Physical Layer data format of the RS‑422 A‑Control conforms to the
following specifications:
Physical Layer Data Format
Electrical:
RS‑422
Start Bits:
1
Data Bits:
8
Hardware CTS, RTS:
Not Supported
Stop Bits:
1
Parity:
None
Baud:
31.25k
Idle State:
High (Active‑low start bit referenced to “+”
signal on RS‑422)
Note that hardware handshaking (dedicated lines for CTS, RTS, DTR, etc.) is
not supported.