Aviom A-16R/A-16CS - Manual (Page 48)

39 A-16R P
eRsonAl
M
ixeR And
A-16Cs C
ontRol
s
uRfACe
u
seR
G
uide
Effect
1166RR
A-Control
MIDI
Out Thru Return Send
R L R L
Left Right
Mono/Stereo
Mix In
R L
onal Mixer
/T/Pin 2 +
_
/S/Pin 1
/R/Pin 3
Line Out Insert
Effect Outputs Effect Inputs
Audio from the A-16R is sent to the effect device’s inputs. The
processed sound is heard when the signal from the effect is
plugged into the A-16R Insert Return jacks.
The audio signal will not be interrupted when a cable is patched into the
Insert Send jack. You can use the Insert Send jacks as an additional pair of
audio outputs as long as no cables are connected to the Insert Return jacks.
Plugging a cable into the Insert Return jack will interrupt the signal heard in
the mix outputs (headphones and rear‑panel line outputs) and will complete
the signal path.
P N
ote
: The insert Send/Return loop includes the auxiliary Mix In signal in
the processing path.
Signal Flow
As seen in the diagram below (from left to right):
A‑Net audio is mixed using the A‑16R •
Signals from the stereo • Mix In jacks are mixed in with the
sixteen‑channel A‑Net mix
The mix goes to the
• Insert Send/Return loop
An effects device processes the mix and returns the result •
to the A‑16R via the Return jack
The processed signal from the Insert is combined to create
•
the final mix that you hear