Aviom A-16R/A-16CS User Manual

Page 71

A-16R P

eRsonAl

ixeR

And

A-16Cs C

ontRol

uRfACe

seR

uide

Problem: Can’t change Presets

Possible Solutions:

Make sure that the

•

ecall

button has been pressed. Its LED

will flash, indicating that you should press a numbered

button to recall a Preset.

Problem: I don’t think my Preset was saved.

Possible Solutions:

When saving a Preset, make sure that the

•

ecall

and G

Roup

buttons are both held down before pressing one of the

numbered memory location button. The Preset is saved

when you release your finger from the memory location

button. When a Preset has been saved correctly, you will

see all sixteen channel LEDs flash momentarily to confirm

the save operation.

Problem: Can’t hear a channel that is part of a Group

Possible Solutions:

The Group might be muted. Check the lower (yellow) LED

•

in the channel buttons. A lit yellow LED indicates the chan‑

nel is muted. To unmute it, press the m

ute

button while the

Group is selected. The yellow LED must be unlit in order to

hear the audio on that channel.
The channel volume is all the way down. In Group edit

•

mode, select the channel and check the level for that chan‑

nel by looking at the LEDs in the Volume indicator. If no

LEDs are lit, then the channel is turned all the way down.

Raise the volume by turning the channel V

olume

knob;

re‑save the Group and Preset if necessary.