Aviom A-16R/A-16CS - Manual (Page 44)

35 A-16R P
eRsonAl
M
ixeR And
A-16Cs C
ontRol
s
uRfACe
u
seR
G
uide
Information Not Saved With a Preset
When saving a Preset the following information is not saved:
• Master Volume level on A‑16R and A‑16CS
Master Bass and Treble • tone control settings
• Auxiliary Mix In level
• R
emote
/l
ocal
switch position on the A‑16R
Setting of the rear‑panel • Mono/Stereo switch on the A‑16R
Stereo Link information set at the A‑Net input module •
Note also that the system does not remember if the optional A‑16CS Control
Surface is connected to the A‑Control jack on the rear panel of the A‑16R.
Verify a Mix Preset Location
When creating and editing mix Presets, it is useful to know which Preset was
the last one to be stored in order to avoid overwriting Presets accidentally.
When preparing to save a mix in the A‑16R or A‑16CS, the software will display
the last mix Preset that was recalled when the R
ecall
and G
Roup
buttons are
held simultaneously. The red LED in the channel button that corresponds to
the last recalled Preset will light as long as these two buttons are held.