Cisco H.323 VC-289 - Manual (Page 74)

Configuring H.323 Gatekeepers and Proxies
H.323 Gatekeeper Configuration Examples
VC-362
Cisco IOS Voice, Video, and Fax Configuration Guide
Removing a Proxy Example
The following example shows how to remove one or more proxy statements for the remote zone
germany.xyz.com from the proxy configuration list:
no use-proxy sj.xyz.com remote-zone germany.xyz.com
The command removes all special proxy configurations for the remote zone germany.xyz.com. After the
command is entered like this, all calls between the local zone (sj.xyz.com) and germany.xyz.com are
processed according to the defaults defined by any use-proxy commands that use the default option.
H.235 Security Example
The following example shows output from configuring secure registrations from the gatekeeper and
identifying which RAS messages the gatekeeper will check to find authentication tokens:
dial-peer voice 10 voip
destination-pattern 4088000
session target ras
dtmf-relay h245-alphanumeric
!
gateway
security password 09404F0B level endpoint
The following example shows output from configuring which RAS messages will contain gateway
generated tokens:
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
radius-server host 10.0.0.1 auth-port 1645 acct-port 1646
radius-server retransmit 3
radius-server deadtime 5
radius-server key lab
radius-server vsa send accounting
!
gatekeeper
zone local GK1 test.com 10.0.0.3
zone remote GK2 test2.com 10.0.2.2 1719
accounting
security token required-for registration
no use-proxy GK1 remote-zone GK2 inbound-to terminal
no use-proxy GK1 remote-zone GK2 inbound-to gateway
no shutdown