Cisco H.323 VC-289 - Manual (Page 23)

Configuring H.323 Gatekeepers and Proxies
H.323 Gatekeeper Configuration Task List
VC-311
Cisco IOS Voice, Video, and Fax Configuration Guide
To verify whether the LRQs will be sent sequentially or simultaneously to the gatekeepers, enter the
show running-config command. If the LRQs will be sent simultaneously, blast will appear beside the
first entry for a particular zone (as shown in the following output for zone 919).
Router# show running-config
Building configuration...
Current configuration:
!
gatekeeper
zone remote c3620-1-gk cisco.com 172.18.194.79 1719
zone remote c2514-2-gk cisco.com 172.18.194.89 1719
zone remote gk-cisco-paul cisco.com 172.18.193.155 1719
zone prefix c3620-1-gk 917300....
zone prefix c2514-2-gk 917300....
zone prefix c2514-2-gk 919....... blast
zone prefix c3620-1-gk 919.......
Configuring Redundant Gatekeepers for a Technology Prefix
To configure redundant gatekeepers for a technology prefix, use the following commands beginning in
global configuration mode:
Command Purpose
Step 1 Router(config)# gatekeeper Enters gatekeeper configuration mode.
Step 2 Router(config-gk)# gw-type-prefix type-prefix
[[hopoff gkid1] [hopoff gkid2] [hopoff gkidn] [seq |
blast ]] [default-technology] [[gw ipaddr ipaddr
[port]]...]
Configures the gatekeepers to service a technology
zone and specifies whether LRQs should be sent in
blast or sequential fashion. The default is
sequential.
The keywords and arguments are as follows:
• type-prefix—Specifies that a technology prefix
is recognized and stripped before checking for
the zone prefix. It is strongly recommended
that you select technology prefixes that do not
lead to ambiguity with zone prefixes. Do this
by using the # character to terminate
technology prefixes, for example, 3#.
• hopoff gkid—(Optional) Specifies the
gatekeeper where the call is to hop off,
regardless of the zone prefix in the destination
address. The gkid argument refers to a
gatekeeper previously configured using the
zone local or zone remote command. You can
enter this keyword and argument multiple
times to configure redundant gatekeepers for a
given technology prefix.