beautypg.com

Cisco H.323 VC-289 User Manual

Page 43

background image

Configuring H.323 Gatekeepers and Proxies

H.323 Gatekeeper Configuration Task List

VC-331

Cisco IOS Voice, Video, and Fax Configuration Guide

Verifying Gatekeeper Proxied Access Configuration

Use the show gatekeeper zone status command to see information about the configured gatekeeper
proxies and gatekeeper zone information (as shown in the following output).

Router# show gatekeeper zone status

GATEKEEPER ZONES

================

GK name Domain Name RAS Address PORT FLAGS MAX-BW CUR-BW

(kbps) (kbps)

------- ----------- ----------- ---- ----- ------ ------

sj.xyz.com xyz.com 10.0.0.9 1719 LS 0

SUBNET ATTRIBUTES :

All Other Subnets :(Enabled)

PROXY USAGE CONFIGURATION :

inbound calls from germany.xyz.com :

to terminals in local zone sj.xyz.com :use proxy

to gateways in local zone sj.xyz.com :do not use proxy

outbound calls to germany.xyz.com

from terminals in local zone germany.xyz.com :use proxy

from gateways in local zone germany.xyz.com :do not use proxy

inbound calls from all other zones :

to terminals in local zone sj.xyz.com :use proxy

to gateways in local zone sj.xyz.com :do not use proxy

outbound calls to all other zones :

from terminals in local zone sj.xyz.com :do not use proxy

from gateways in local zone sj.xyz.com :do not use proxy

tokyo.xyz.co xyz.com 172.21.139.89 1719 RS 0

milan.xyz.co xyz.com 172.16.00.00 1719 RS 0

inbound-to—Applies the proxy policy to calls
that are inbound to the local zone from a remote
zone. Each use-proxy command defines the
policy for only one direction.

outbound-from—Applies the proxy policy to
calls that are outbound from the local zone to a
remote zone. Each use-proxy command defines
the policy for only one direction.

gateway—Defines the type of local device to
which the policy applies. The gateway option
applies the policy only to local gateways.

terminal—Defines the type of local device to
which the policy applies. The terminal option
applies the policy only to local terminals.

Command

Purpose