Px1 configuration – Cisco H.323 VC-289 User Manual
Page 71
Configuring H.323 Gatekeepers and Proxies
H.323 Gatekeeper Configuration Examples
VC-359
Cisco IOS Voice, Video, and Fax Configuration Guide
Configuring a Closed Co-Edge Proxy with ASR Without Subnetting Example
illustrates how to configure RIP on the edge networks and IGRP on the two backbone
networks. A Cisco 2500 router is used for the proxy.
Figure 67
Configuring a Closed Co-Edge Proxy with ASR
PX1 Configuration
The following output is for the PX1 configuration:
!
version 11.3
no service password-encryption
service tcp-small-servers
!
hostname ExampleProxy
!
!
no ip domain-lookup
!
!
proxy h323
!
interface Loopback0
ip address 10.0.0.1 255.0.0.0
h323 interface
h323 qos ip-precedence 4
h323 h323-id [email protected]
h323 gatekeeper ipaddr 172.20.0.3
!
interface Ethernet0
ip address 172.20.0.1 255.255.255.192
no ip redirects
!
interface Serial0
no ip address
shutdown
!
interface Serial1
ip address 172.22.0.1 255.255.0.0
ip access-group 101 in
ip access-group 101 out
h323 asr
!
router rip
PX1
L0: 101.0.0.1
E0: 172.20.0.1
E0: 172.20.0.2
E1: 172.21.0.1
S1: 172.22.0.1
E0: 172.20.0.3
EP1
R1
11394
GK1
Data backbone
Multimedia
backbone
Edge net 1