Cisco H.323 VC-289 User Manual

Page 31

Configuring H.323 Gatekeepers and Proxies

H.323 Gatekeeper Configuration Task List

VC-319

Cisco IOS Voice, Video, and Fax Configuration Guide

In addition to the above configuration, make sure that the following information is configured in your
CiscoSecure AAA server:

•

In the /etc/raddb/clients file, ensure that the following information is provided.

#Client Name Key

#----------- -------------------

gk215.cisco.com testing123

Where:

gk215.cisco.com is resolved to the IP address of the gatekeeper requesting authentication.

•

In the /etc/raddb/users file, ensure that the following information is provided:

[email protected] Password = "thiswouldbethepassword"

User-Service-Type = Framed-User,

Where:

[email protected] is the h323-id of the gateway authenticating to gatekeeper gk215.cisco.com.

Step 4

Router(config)# radius-server host {host-name |

ip-address} [auth-port port-number] [acct-port

port-number] [timeout seconds] [retransmit retries]

[key string]

Specifies the RADIUS server host.

For an explanation of the keywords and arguments,
see Step 3 in the configuration task table in the

Step 5

Router(config)# radius-server key {0 string | 7

string | string}

Sets the authentication and encryption key for all
RADIUS communications between the router and the
RADIUS daemon.

For an explanation of the arguments, see Step 4 in the
configuration task table in the

Command

Purpose