Panasonic OMNIVISION PV-M2057 - Manual (Page 9)

(¡Case
2) If
AUTO CLOCK SET IS INCOMPLETE
appears, please set the clock manually.
a. Push MENU to display the SET CLOCK screen.
b. Push A T to select and 0> to enter
the month, date, year, time, and
D.S.T. {Daylight Saving Time).
To Make Corrections,
push <3 repeatedly to move back or
forward to the desired item,
c. Push MENU to start the clock.
Then, push A T ^ G^to select
“EXIT.” Now, push MENU to exit
the MAIN MENU.
SET CLOCK...................
1 /-/----
Msa
SELECT :A ▼ KEY
SET :► KEY
END :MENU KEY
“DST:ON"
automatically adjusts
for daylight saving
time. (See page 41.)
To Change or Re-enter One
Time Setup Items_____________
To Change the OSD Language
1 Push MENU to display the MAIN MENU.
2 Push » T <1 to select the language selection icon.
3 Push MENU repeatedly to change the language as shown.
4 Push A to select “EXIT,” and then push MENU to
exit the MAIN MENU.
To Replace Channels in Memory
In case, you have cable installed, etc.
1 Push MENU to display the MAIN MENU.
2 Push » < 1 0 to select “CH," and
then push MENU to display the
SET UP CHANNEL screen.
3 Push A V repeatedly to select
ANTENNA SYSTEM, and then push
lE>to select your antenna system
(TV or CATV).
4 Push A vto select AUTO SET, and
then push 0 to start.
• To exit this mode, push MENU.
Then, push A T <1 to select “EXIT."
Now, push MENU to exit the MAIN
MENU.
SELECT KEY
SET ;MENU KEY
SET UP CHANNEL - - -
ANTENNA SYSTEM : CATV
SELECT : i ▼ KEY
SET :► KEY
END :MENU KEY
To Set or Reset the Clock
In case the clock is wrong, or a power failure occurred.
1 Push MENU to display
the MAIN MENU.
2 Push A V <10 to select
“CLOCK.” Then, push
MENU to display the
SET CLOCK screen.
3 Push A vto select
“MANUAL SET,” and
then |> to display the
SET CLOCK screen.
4 Please do steps 6 and c
at the top of this page.
............ SET CLOCK ....................
AUTO SET
ranmBa
SELECT : A Y KEY
SET :► KEY
END :MENU KEY
SET CLOCK...................
1 /--/---
gàiiai
DSTiON
maaifl
SELECT ; A T KEY
SET :»■ KEY
END :MENU KEY
To Add or Delete a Channel
Select a channel
using the
NUMBERED
keys to add or
the CH A Vto delete.
Push the ADD/DLT
to add or delete the
channel.
• To select a channel once
it’s deleted, use the
NUMBERED keys.
This Combination VCR will accurately maintain its calendar up to Dec. 31,2089, 11:59PM.
Normal TV or Cable channels are automatically selected and placed in memory depending on
how your Combination VCR is hooked up.