Record on a tape, Check list before you begin, One touch timer recording (otr) – Panasonic OMNIVISION PV-M2057 User Manual
Page 35: Selecting the input mode, One touch recording (otr)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/654224/35/background.png)
Record On a Tape
Check list before you begin.
□ All connections are made (see page 5).
□ Your Combination VCR is plugged in.
Insert a cassette with record tab
The Combination VCR
power comes on automatically.
PushATor NUMBERED
keys on the remote
control to select a channel.
• Or, push CH UP/DOWN on the
Combination VCR.
• To record from an outside
source, push A T to select LINE
input (see bottom of the page).
ft! STEREO *■
SAP
MONO
CH 02
Push SPEED repeatedly
until the desired tape speed
is displayed (see page 41).
SP = standard Play
LP = Long Play
SLP = Super Long Play
REC
02
Push REC/TIME on the
remote control to start
recording.
• Or, push REC/TIME on the
Combination VCR.
• To edit out unwanted portions,
push PAUSE to pause the
recording in progress. To release, push PAUSE again.
TO SET SPECIFIC REC TIME
PLEASE PUSH REC KEY
One Touch Timer Recording (OTR)
The Combination VCR stops recording at a preset time.
In step 4, push REC/TIME repeatedly to set the length of the
recording. Each push will change the time as shown.
C
►Normal Rec—►0:30—►1:00-^
4 : 0 0 3 : 0 0 - 4 — 2 : 0 0 1 : 3 0
* The PROGRAM TIMER indicator lights on the front panel.
Push STOP on the remote control to stop
recording.
• Or, push STOP/EJECT on the Combination VCR.
While it is possible to change the tape speed when you are
recording, there will be some distortion on the tape where the
change occurred.
The remaining recording time of an OTR can be displayed by
pushing DISPLAY.
After the Combination VCR has been in Rec Pause mode for 5
minutes, it will stop automatically to protect the tape and video head.
Selecting the Input Mode
You can select the Input Mode in either of the following ways.
■ Push A V. The display will change in the order below.
C
—► 1 — 2 — 3-----------V
(CATV) (QATV) (jv) J
line
-4--- 125 or 69-^-^
■ a. Push MENU to display the menu.
b. Push A V ^ ^ to select “TV," and then push MENU to display the
SET UP TV screen.
c. Push A Vto select “INPUT SELECT,” and then push repeatedly to
select TUNER” or TINE.”
35