To print out info (information) center data, Displaying program related information (pri), Auto pop-up pri (program related information) – Panasonic OMNIVISION PV-M2057 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

□ All connections are made (see page 5).
□ Your Combination VCR is plugged in.
□ TV GUIDE Plus+ setup is completed
(see pages 11-14).
□ Your Cable box is ON if used.
□ TV GUIDE Plus+ mode is terminated
if...
• power is turned off or power failure
occurs.
• Play or Rec mode is entered.
• entries are not made within 5
minutes.
\\Acheck list before you begin.
4
a
m
b
To Print Out Info (Information)
Center Data
• You need a G-Link Adapter and a printer for this function.
Also, in order to make the proper connections, you will first
need to disconnect the Cable Box Controller (see page 12)
from the G-Link jack on the Combination VCR.
G-Link Adapter
Printer
Back of Combination VCR
1. Make connections as shown above.
2.
Make sure all components are turned ON.
3.
Push the red key in step 3 on the previous page to
start printing the information.
4.
Push the blue key to return to the Choice mode, or
push TV/GUIDE to return to the normal screen when
printing is finished.
NOTES
The G-Link Adapter will be available at a future date.
When you are finished printing, be sure to reconnect the Cable Box
Controller for proper TV GUIDE Plus-t- operation.
Displaying Program Related
Information (PRI)
Some programs are broadcast with additional program related information,
such as player statistics during a sports program, etc.. Follow the steps below
to retrieve the information.
a. Push INFO to display any available information related to the
program you are watching.
• When a program with PRI data is recorded, push INFO during
playback to display the information.
• The PRI will have priority and Closed Caption text will not appear white
the PRI is displayed.
h. Push INFO again, to remove the information from the screen.
Auto Pop-Up PRI
(Program Related Information)
Stations may sometimes broadcast program related information
which will automatically appear on your screen while you are
watching TV. The AUTO POP-UP PRI will then time out.
• Push INFO, or wait for the PRI to time out to remove the information from
the screen.
• When a program is recorded containing Auto Pop-Up PRI, this information
is also recorded on the tape.
• The PRI will have priority and Closed Caption text will not
appear while the Auto Pop-Up PRI is displayed.
23