Panasonic OMNIVISION PV-M2057 - Manual (Page 34)

^^Tape Operation
Your Combination VCR is equipped with
several time saving features as well as
convenient automatic functions which make
tape operation easier than ever.
Auto Operation Functions
Auto Shut Off
In TV or Game mode, when a broadcast
signal is not received for 5 minutes, the
Combination VCR will automatically power
off (except when LINE INPUT is selected).
In Playback mode, when a Video signal is not
detected for 5 minutes, the Combination VCR
will automatically power off and the tape will
be rewound.
• This feature is deactivated when any
button on the unit or remote control is
pushed even if there is no signal present.
Auto Playback
When a tape is inserted, the power turns
on (Auto). If the record tab* is removed,
playback begins (Auto).
Auto Rewind
When a tape reaches its end during playback
or fast forward the Combination VCR will
rewind the tape and go into Stop mode.
Playback Auto Eject (Repeat Play is “OFF.”)
When a tape without a record tab* is played to
its end, the Combination VCR will rewind and
then eject the tape.
Memory Rewind Off
When POWER is pushed during tape rewind,
rewinding will be completed even though the
Combination VCR turns off.
‘For record tab information, see page 41.
Repeat Play
You can set your Combination VCR up to play a recording over and over.
Push MENU to
display the MAIN
MENU.
PushA T ^ to
select “VCR,” and
then push MENU
to display the SET
UP VCR screen.
MAIN MENU
SELECT KEY
SET :MEm KEY
Push O repeatedly
to select “ON” or
“OFF.”
............ SET UP VCR ...................
REPEAT PLAY : OFF
BEEPER ON
SELECT
SET
END A T KEY
► KEY
MENU KEY
When REPEAT PLAY : ON is selected (the REPEAT indicator lights
on the front panel), the Combination VCR will playback the tape to its
end, or until a blank portion of 30 seconds or more is reached. (Erased
portions of tape are not considered blank.) The tape is then
automatically rewound and played again. This operation is repeated
until you cancel Repeat Play.
All function buttons (REW, FF, etc.) are operational during Repeat Play.
@
Push MENU to exit the SET UP VCR
screen. Then, push A T 0 E>to select
“EXIT." Now, push MENU to exit the
MAIN MENU.
You may also turn the repeat play feature on and off at the
I NOTF 1 Combination VCR. During playback, push PLAY once or
V—/ (OFF).
One Minute Skip
With this feature, you can skip over commercials recorded on a tape.
Push ZERO/1MIN in Play mode.
• The Combination VCR will go into FF search mode
and skip over 60 seconds of recorded time.
Then, normal playback will resume.
Zero Search
You can reset the Time Counter to zero and then return to that point.
Push DISPLAY to “
display the Time
Counter overlay.
DISPLAY
Push COUNTER
RESET where
desired to reset the
Time Counter to
0 : 00 : 00 .
STOP 12;00AM WNET
0:00:30
SLP
STOP 12;00AM WNET
0:00:00
SLP
34
Push ZERO/1MIN in
Stop mode.
• The Combination VCR will go into FF or REW
mode and stop at the last point the Time Counter
was set to 0:00:00.