Panasonic KX-TC1731B - Manual (Page 55)

Setting the Unit to Call a Pager
Press iPLAYBACkl.
® The number of new messages is
heard on the handset.
2 Press (^.
• “E3S13” is displayed on the base
unit.
® If “E^3” is not displayed, the
pager number is not stored.
Store the number {p. 50, 51), and
try again.
Q Press fPL^BACKl.
To turn off the pager call mode,
repeat steps 1 through 3.
0 “EE33” will disappear,
o Each time you press @ in step 2, the
mode will turn on or off. [ PLAYBACK]
If you have not subscribed to a Caller ID service, the caller’s telephone
number will not be displayed on your pager.
> If another message (or Caller ID call) is received before the unit alerts your
pager for a previous message (or Caller ID call), the previous caller
information will not be sent to your pager. Only the last call received will be
sent to your pager.
' If someone else makes or answers another call with the unit or a parallel
connected phone before the unit alerts your pager for a previous message
(or Caller ID call), the unit will stop alerting your pager for that message
(Caller ID call).
»If you receive a caller’s telephone number in your pager but cannot
recognize the caller, you may have received a direct inward dial (DID) call,
such as from a PBX. Please call your unit to check the caller’s message.
55