Panasonic KX-TC1731B - Manual (Page 50)

Pager Cali
This feature allows you to alert your pager when the unit records an
incoming message or receives a Caller ID call (p. 54). You can retrieve the
message from a touch tone telephone (p. 56). If you subscribe to a Caller ID
service, the caller’s telephone number will be displayed on your pager. First
program the following settings (p. 50-54), then set the unit to call the pager.
The TALK indicator light must be off before programming.
storing a Pager Number
If you use a 1-800 pager number, see the next page for the storing procedure.
1
2
3
Press [PROGRAM I.
o The TALK indicator flashes.
Press I PLAYBACK!,
o “p” is displayed on the base unit.
Press [#).
o ” is displayed on the base unit.
Enter your pager number, and
press [REDIAUPAUSEl twice.*
Enter the access code, if required
by your pager company, and press
iREDIAL/PAUSEl twice again.*
o The entered number is displayed
on the base unit.
o If you misdial, press I PROGRAM!
and start again from step 1.
o You can enter a total of 44 digits.
Press fPROGRAMl.
o A beep sounds.
* Pager companies require a delay after the pager number and/or the
access code is dialed. Contact your pager company regarding the
required pause time. Pressing iREDlAL/PAUSEl once creates a 3.5
I second delay and counts as one digit.
o If the line has rotary or pulse service, press ® between the pager
number and I REDIAUPAUSEl in step 4.
50