Panasonic KX-TC1731B - Manual (Page 18)

^ Settings
Storing Your Area Code
We recommend that you program your area code first before using the
Caller ID feature (p. 34). Incoming calls from the same area code will then
be recorded in the Caller List without the area code. You do not have to
remove the area code before calling back or storing. When incoming calls
from a different area code are received, “1” will automatically be added
before the area code.
The TALK indicator light must be off before programming.
-j Press IPROGRAMI.
« The TALK indicator flashes.
p Press SEARCH 0 (Next key).
^ Be sure that “Area code ?” is displayed.
2 Press SEARCH 0 (Yes key).
o The current setting is displayed.
If no area code has been programmed,
“—” will be displayed.
Enter your area code.
« If you enter a wrong number, press
ICLEARl. and enter the correct number.
Press I PROGRAM I (Save key),
o A beep sounds.
o The handset will return to the stand-by
mode.
Save AUTO# ?
v^Next A=Yes
Area code ?
v^Next A=Yes
Area code
Enter area code
Area code
:123
PROGRAM=Save
Area code
:123
o To cancel during programming, press lEXITl. Start again from step 1.
To erase the area code
Press [PROGRAMI O SEARCH Q (Next key) >=> SEARCH @ (Yes key) <=>
[CLEAR] «=> [PROGRAM! (Save key).
o If a “2nd area code” has been stored (p. 19), it will also be cleared
automatically.
18