Panasonic KX-TC1731B - Manual (Page 45)

FLASH Button
Pressing (FLASH) allows you to use special features of your host PBX such
as transferring an extension call or accessing special telephone services
(optional) such as call waiting.
« You can press [CALL WAlfl instead of [FLASHI on the handset.
Selecting the flash time (call waiting time)
The flash time (call waiting time) depends on your telephone exchange or
host PBX. You can select the following flash times (call waiting times) “700,
600, 400, 300, 250,110,100 or 90 ms (milliseconds)”,
using the handset
near the base unit. Your phone comes from the factory set to “700 ms”.
The TALK indicator light must be off before programming.
-j Press I PROGRAM).
o The TALK indicator flashes.
Q Press SEARCH 0 (Next key) repeatedly
^ until “Set flash time?” is displayed.
Q Press SEARCH @ (Yes key).
A Press SEARCH 0 (Next key) repeatedly
* until the desired time is displayed.
SAVE AUTO# ?
v=Next A=Yes
Set flash time?
v=Next A=Yes
Flash time
:700ms
v=Next A=Save
Press SEARCH 0 (Save key).
o A long beep sounds,
o The display will return to the stand-by
mode.
o To cancel during programming, press (EXIT) or [PROGRAM]. Start again
from step 1.
o If 3 beeps sound and the display shows “Save error”, move closer to
the base unit and try again. If “Save error” is still displayed, place the
handset on the base unit. Start again from step 1.
o If you are connected via a PBX, a longer flash time may be necessary to
use PBX functions (transferring a call, etc.). Consult your PBX installer
for the correct setting.
45