Pager call pager iviode setting – Panasonic KX-TC1731B User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pager Call
Pager iViode Setting
After subscribing to a Caller ID service (p. 34), you can select one of the
following pager mode settings. The unit will alert your pager:
1. after the unit records an incoming message (factory preset),
OR
2. each time the unit receives a Caller ID call, even if the caller does not
leave a message.
If you want to change the mode, proceed as follows.
1
2
3
Press IPROGRAMI.
o
The TALK indicator flashes.
Press iPLAYBACKl.
o “P” is displayed on the base unit.
Press ©.
o The current setting is displayed on
the base unit.
To select “2”, press (^.
OR
To select “1”, press (T).
o The entered number is displayed
on the base unit.
Press [
program
!.
o A beep sounds.
o If you select “2” and set the unit to call a pager (p. 55), the unit will alert
your pager even if the answering system is not turned on.
o Even if you select “2”, the unit will not alert your pager when a Caller ID
call which does not have a phone number is received.
54