Programming summary for the answering system – Panasonic KX-TC1731B User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming Summary for the Answering System
You can program the following functions using the handset near the
base unit. See the page numbers below for details.
The TALK indicator light must be off before programming.
Lift the handset, and press [PROGRAMl.
Press I
playback
!.
o
“Answering system setting”
is displayed on the handset.
i
o If the handset displays
“Out of range”
and an alarm
tone sounds, move closer to base unit and try again.
To adjust the time and day, press
(page 26)
To set the remote code, press Q.
{page 57)
To select the number of rings, press
{page 28)
To select the caller’s recording time, press
{page 27)
To select the pager mode setting, press (6).
(page 54)
To store your home telephone number, press ©■
(page 52)
To store a pager number, press (#].
(pages 50, 51)
o The base unit display shows numbers or characters related to the
adjustment or settings.
Press [PROGRAMl.
o A long beep sounds.
» If 6 beeps sound, the setting is not correct. Start again from the
beginning.
« To cancel during programming, press I PROGRAM!. Start again from the
beginning.
o If 6 beeps sound during programming, a wrong key was pressed.
Enter the correct number.
25