Selecting the line mode – Panasonic KX-TC1731B User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Otherwise the Visual Call Waiting (Call Waiting ID) Service may not be
available (p. 44), and the unit may not alert your pager (p. 50). Your phone
comes from the factory set to “A”.
The TALK indicator light must be off before programming.
1
2
3
Press [PROGRAMI.
o The TALK indicator flashes.
Press SEARCH 0
(Next
key) repeatedly
until
“Set line mode
?” is displayed.
Press SEARCH 0
(Yes
key).
To select “B”, press SEARCH 0.
OR
To select “A”, press SEARCH 0.
o A beep sounds.
o The handset wilt return to the stand-by
mode.
Save AUTO# ?
v=Next
A-Yes
Set line mode ?
v-Next A=Yes
Line mode
Line mode
Line mode
v=A
A
= B
o To cancel during programming, press I EXIT I or (PROGRAM). Start again
from step 1.
o If 3 beeps sound and the display shows
“Save error”,
move closer to
the base unit and try again. If
“Save error”
Is still displayed, place the
handset on the base unit. Start again from step 1.
17