Using the record timer – Panasonic SC-DV100 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
____
OPLAYi0REC
@
Using the timer
Using the record timer
This timer records the radio at the set time.
The example shows settings for recording preset channel 3 from
6:00 p.m. (18:00) to 6:30 p.m.(18:30).
The example in the figure is 12 hour clock.
Preparation:
Turn the unit on, set the time page 14), preset radio stations
(• page 15).
0Press [CLOCK/TIMER, -DEMO] to select
“© REC”.
@ Press [SET] within 3 seconds.
{“ON” time setting)
0
Press [TUNING
(v
or
a
)]
to show the time to
start recording.
0 Press [SET].
(“OFF” time setting)
0
Press [TUNING
(v
or
a
)]
to show the time to
finish recording.
0 Press [SET].
FI 0Press [TUNING (v or
a
)] to select the de
sired preset channel.
The display will change as follows.
CH1^CH2...CH38^CH39
t_____________________i
© Press [SET].
•The display will show ON time, OFF time, the broadcast sta
tion you select alternately, and then resumes the previous dis
play.
•Please confirm “© REC".
Q Prepare for recording.
© Insert a tape into deck 2.
@ Select the Dolby NR mode.
@ Select the reverse mode.
@ Select the tape travel direction.
Q Press Standby/on switch to switch the power
to standby mode.
The timer recording will start 30 seconds before the preset time.
The sound will be automatically muted during timer recording.
To cancel the timer
Turn the unit on and press [© PLAY/© REC] to turn off “© REC".
Each time you press the button,
© PLAY-^© REC^® PLAY © REC->Light off (off)
t_________________________________ I
The record timer function will be cancelled, but the settings stay in the
memory.
£
o
0
"0
c
0
o
E
RQT5056